DIY products

Time to shine! Reflective prints are the perfect way to be seen in the dark and stay safe! It's almost like magic, you can attach these babies almost anywhere: scarves, mittens, beanie, coats, jackets, jeans, stockings, shoes. Let your imagination run wild!

Attaching a reflective print is easy as pie! Let’s do it!

But first! Please try ironing the material you're planning on using with your iron on full power on some unnoticeable spot. We do not recommend attaching prints to Gore-Tex fabrics.

1. Place the print where you want it, with the stickier/rougher side down and the smooth/slightly blurry side up. (If you’re attaching a piece of the film, make sure to remove the transparent film from the side that is towards the material.)
2. Cover with a baking sheet.
3. Place your iron over the print and press down with force for approx. 15 seconds. (The print is fine even if you press a tad longer, but any less might make it less cooperative.)
4. Let the print cool to at least room temperature.
5. Gently peel the top layer off with a swift motion.
6. Cover the print with a baking sheet again.
7. Place your iron over the print and press down with force for approx. 5 seconds.