Attaching your print
Here's how!
Moikos
DIY-produkter
Gör dina kläder lysande! Välj ett mönster du tycker om och fäst trycket var som helst; på ryggsäcken, jackan, vantarna, mössan, halsduken, handväskan, träningsbyxorna eller strumpbyxorna. Klipp, placera och anpassa så som du vill!
Reflexbanden kan strykas, sys eller fästas var som helst; till och med i sömmarna, tofsen eller skosnören!
Attaching your print
Attaching a reflective print is easy as pie! Let’s do it!
But first! Please try ironing the material you're planning on using with your iron on full power on some unnoticeable spot. We do not recommend attaching prints to Gore-Tex fabrics.
- Place the print where you want it, with the stickier/rougher side down and the smooth/slightly blurry side up. (If you’re attaching a piece of the film, make sure to remove the transparent film from the side that is towards the material.)
- Cover with a baking sheet.
- Place your iron over the print and press down with force for approx. 15 seconds. (The print is fine even if you press a tad longer, but any less might make it less cooperative.)
- Let the print cool to at least room temperature.
- Gently peel the top layer off with a swift motion.
- Cover the print with a baking sheet again.
- Place your iron over the print and press down with force for approx. 5 seconds.